Salamura Titanyum ve Titanyum Alaşımlı Santrifüj Pompa
Marka DALIAN KEHUAN PUMP
Ürünün menşei DALIAN,LIAONING,ÇİN
Teslimat süresi ÜÇ AY
arz kapasitesi YETERLİ TEDARİK
Kehuan pompası, manyetik pompaların (Yüksek güç, Yüksek sıcaklık, Çamur, Kolay buharlaşma, Yüksek erime noktası, vb. Gibi) statükosunda kapsamlı bir atılım yapar. Tasarım çerçevesi: Avrupa'nın gelişmiş hidrolik modelini kullanıyoruz; Amerikan petrol enstitüsü standardı API685'e göre tasarım standartları. Yüksek standart malzeme uygulaması: Kalıcı mıknatıs (Sm2Co17, Sıcaklık -196~450℃), Kayar yatak (SSIC), Muhafaza kovanı (HC-276), Rulman (SKF/NSK), Kaplin (Wuxi Chuang ming) /Alman KTR ), Elektrik motoru (Nan yang/Jiamusi).
Brine Titanium And Titanium Alloy Centrifugal Pump
Product attributes:
Maximum head :
Maximum fiow:
Driving type:Motor
Working impeller number:Single-Stage Pump
Working Pressure:Middle Pressure Pump
Working impeller inlet way:Single Suction Pump
Pump shaft positon:Horizontal Pump
Pump shell combination:Horizontal Split Pumps
Installation height:Suction Centrifugal
Impeller structure:Closed
Transportation package:Wooden Case
Specification:API 610 standard
Trademark:Dalian Kehuan Pump Co.,Ltd
Origin:Dalian,Liaoning,China
Size: 1-16 inches
Flow:0~2600m3/H
Capacity: 0-2600 m3/h
Head: 0-240m
Temperature: -80-300 °C
Pressure:~2.5MPa
}Single-stage horizontal, radially split volute casing pumps with feet below and single-entry radial impeller
}Single-stage horizontal, radially split volute casing pumps with feet below and single-entry radial impeller, end suction branch, radially upwards discharge branch.
}Depending on operating conditions hydraulic balance provided by front or rear wear rings and balance holes. Casing cover with cooling or heating connections ,
shaft sealing by packings or mechanical seals of any design (single or double seal design ), connections for cooling, flushing or sealing liquid.
}Standardize pipework according to API plans
}Flange possible according to GB, DIN, or ANSI
Material:
Carbonsteel; chromed steel; austenitic stainless steel; duplex steel; Titanium and Titanium Alloys; Hastelloy C-276 and other special materials; It depends the customer's request.
S-5 | S-6 | C-6 | S-8 | A-7 | A-8 | D-1 | D-2 | |
Casing | Cast steel | Cast steel | CA15/CA6NM | Cast steel | AUST SS | 316 AUS | DUPLEX | SUPER DUPLEX |
Impeller | Cast steel | 12%CR | CA15/CA6NM | 316 AUS | AUST SS | 316 AUS | DUPLEX | SUPER DUPLEX |
Shaft | AISI4140 | AISI4140 | SS420 | 316N | AUST SS | 316N | 2205 | 2507 |
Wear rings | 12%CR | 12%CR | 12%CR | 316 Hard faced | AUST SSHard faced | 316 Hard faced | Duplex Hard faced | SUPER Duplex |
Bearing Frame | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel |
Suitable for pumping clean or polluted, cold or hot, chemically neutral or corrosive liquids.
Apply for refineries, petrochemical industry, coal processing, fertilizer, power auxiliary circulation, heating and air-conditioning, zone heat supply, paper and pulp, water & wastewater, general industry.
Foot-mounted,single-stage ,overhung,horizontal
For pumping clean and slightly polluted,cold or hot .chemically neutral or aggressive liquids
In refineries, petrochemical industry, coal processing and cryogenic engineering
In chemical, fibre and general processing industries,particularly in paper and general processing industries,particular in paper and pulp industries and sugar industry
In water industry,particular sea water desalination plants
In heating and air conditioning plants and condensate recovery
In auxiliary circuits of power stations
In environmental protection engineering
In ship and offshore industries
